Performance Marketing 9 min read

Google Ads in November 2026: Channel Priorities, New Automation Defaults and Four Deadlines Through February

For the first time Google gives advertisers controls for individual channels within a campaign, while switching on several automations by default. On top of that come four deadlines between December 1 and February 2027, from Demand Gen to server-side Tag Manager. The monthly update with everything to do before and after Black Week.

Simon Bluhm
Co-Founder, rulers · LinkedIn ↗
Google Ads · Monthly Update
Ads November
TL;DR

Since October 15, 2026 Google has been rolling out channel prioritization: channels in a campaign can be set to high or low priority, and low-priority ones capped as a percentage of the daily budget, across Search, Shopping, Performance Max, and Demand Gen. In Performance Max, however, the Google channels remain one block. Four deadlines are coming: in the week of December 1 Demand Gen loses the campaign-level Display opt-out, from December 4 new Performance Max campaigns extract landing page images by default, from January 11, 2027 Google's ad tags in the server container process full IP addresses, and in February 2027 the spend allocation of Search campaigns with Display changes. Ads in AI Mode reach ten more countries, none of them in the EU. Also new: goals for existing customers, an invalid traffic card, and Google Ads API v26.

Four dates for your calendar

  1. Week of December 1, 2026: Demand Gen loses the campaign-level Display opt-out. Display is controlled per ad group only.
  2. December 4, 2026: new Performance Max campaigns pull images from the landing page by default, even if dynamic images are switched off at account level.
  3. January 11, 2027: Google's ad tags in server-side Tag Manager process full IP addresses. This affects every setup with a server container, especially in the European Economic Area.
  4. February 2027: Search campaigns that include the Display Network lose their current spend allocation. Google Ads API v23 is expected to sunset in the same month.

Prioritize channels and cap budget

Google announced the biggest change of the month on October 14 and has been rolling it out since October 15: within a campaign, channels can be marked "High priority" or "Low priority". Low-priority channels can also receive a cap, set as a percentage of the average daily budget. This applies to Search, Shopping, Performance Max, and Demand Gen. It is the general release of the controls we described as a Performance Max alpha in our September update.

What you can set depends on the campaign type:

  • Search: Google Search, search partners, and the Display Network, each separately.
  • Shopping: Google Search and search partners.
  • Performance Max: Google channels as one block, plus search partners and Display.
  • Demand Gen: prioritization only, no budget cap.

Know the limits before promising a client more control. In Performance Max, Search, YouTube, Gmail, Discover, and Maps remain a single block, so you still cannot separate Search from YouTube. According to Google the cap works on a best-effort basis and resets daily. If a campaign is not limited by budget, prioritization does not change how the budget is spent, according to the help page. The setting cannot be applied from a manager account. The rollout is global over the coming months and varies by account.

This creates a deadline. Search campaigns that also run on the Display Network lose their current spend allocation in February 2027. To keep today's behavior, the help page says to set Display to low priority with a 50 percent allocation. Campaigns using Target Impression Share will stop serving on Display altogether.

New defaults in Performance Max and Demand Gen

Three changes follow the same pattern: an automation is on unless you actively turn it off.

  • Images from the landing page: from December 4, image extraction is the default for new Performance Max campaigns in the interface, in Editor, and through the API. The account-level dynamic image setting no longer prevents it. Existing campaigns stay as they are. Google explicitly advises confirming image rights, and that deserves attention: stock photos with restricted licenses, manufacturer images, and photos of people otherwise end up in ads without anyone deciding it.
  • Videos from other channels: Performance Max can pull in videos that already exist elsewhere, which Google calls "sourced videos". According to the help page the setting is enabled by default for all new campaigns and may have been switched on for some existing ones.
  • Display in Demand Gen: in the week of December 1 the campaign-level Display opt-out disappears. Existing campaigns are migrated so that serving does not change. Ad groups that would run on Display only are paused by Google.

The new Google Ads Editor 2.14 continues the trend. New Search campaigns there default to AI Max, automatically created text assets, and final URL expansion. If you copy campaigns in Editor as templates, check those three boxes.

Ads in AI Mode: ten more countries, none in the EU

On October 28 Google expanded ads in AI Mode to ten more countries: Australia, Canada, India, Kenya, Malaysia, New Zealand, Nigeria, Pakistan, the Philippines, and Singapore. Brazil, Mexico, and the UK are planned for the fourth quarter. Ads on follow-up questions within a conversation are launching in the US only. No EU member state is on the list.

If you advertise in the newly added markets, watch search terms and costs there, because AI Mode placements serve from existing campaigns. For advertisers focused on the EU nothing changes for now. What the November core update is moving in organic results at the same time is covered in our post on the Google core update of November 2026.

Targeting existing customers on purpose

Since October 22 Google has been expanding customer lifecycle goals. High value mode, which bids more for especially valuable new customers, is coming to Shopping campaigns. Performance Max, Search, and Shopping get new goals for existing customers: re-engagement, loyalty, and a retention-only option. Percentage bid adjustments are leaving beta. Existing customers are identified through Customer Match lists, among other signals.

The announcement came from Google's Ads Liaison, there is no dedicated blog post, and according to Search Engine Journal the help page was not fully updated at launch. For stores with repeat buyers it is still the most interesting change after the channel controls. Until now Google Ads let you favor new customers but gave you little to address existing ones deliberately.

Measurement and consent

  • Data Strength Uplift: a new metric estimates, on a rolling 14-day basis, how many additional conversions become visible through enhanced conversions for leads, Google Tag Gateway, and Data Manager connections. It is directional and does not feed into bidding.
  • Stricter requirements for Conversion Lift: according to Search Engine Roundtable, Google has tightened the setup documentation. Offline imports based on GCLID alone are no longer sufficient, and web conversions imported from GA4 are not supported. There is more specific guidance on advanced Consent Mode for the European Economic Area. If you plan the self-service test from our October update, check this first.
  • Full IP addresses in the server container: from January 11, 2027, Google's ad tags in server-side Tag Manager process the full IP address, and container-wide redaction no longer applies to them. This covers the tags for Google Ads, Display & Video 360, Search Ads 360, and Campaign Manager 360, while Analytics tags keep redacting. The date comes from a Google email to advertisers reported by Search Engine Journal. There is no public Google page on it yet. Advertisers in the European Economic Area must comply with Google's EU user consent policy. To keep redaction you need a transformation in the container. Our pages on server-side tracking and Consent Mode explain how the two connect.
  • Smart Bidding learning period: Google rewrote the help page. The learning status, it now says, never lasts more than seven days, and changes to budgets, targets, creatives, or targeting do not trigger it. Ahead of Black Week that is a useful planning figure. It is not a guarantee of stable results after seven days.

Invalid traffic and Merchant Center

Since November 12 Google has been gradually rolling out an invalid traffic card on the Overview page. It shows two values: the estimated cost saved by automated filters before billing, and the amounts credited back afterwards. A detail page breaks both down by day and by campaign. That is more transparency than before, but it remains Google's own accounting. How to cross-check it is covered in our post on click fraud in Google Ads.

Merchant Center has two points for the holiday season. According to Google's policy, promotion titles must not include dates in any format, and redemption dates belong in their designated fields. The page names a short month abbreviation as the exception. A title like "Black Friday 11/27" risks disapproval. And the "Deal ends" annotation, which highlights expiring offers, is no longer experimental but is not available in the European Economic Area, Switzerland, the UK, or India.

Google Ads API: v26 and a new cadence

For developers and anyone working with scripts, feeds, or custom reporting: Google Ads API v26 was released on October 14, v26.1 on October 28, and v26.2 on November 11. Starting with v26 there are two releases per month, still with four major versions per year. Channel prioritization has been available through the API since v26.1. Version 23 is expected to sunset in February 2027, with no exact day set yet.

Since November 4 the Data Manager API supports call conversions for Google Ads and returns row-level diagnostics. For businesses that close leads on the phone, sending that data back into the account gets simpler.

What we are checking for clients right now

  1. Look for the channel controls: the rollout arrives account by account. Where it is live, we read the channel report first and set priorities second. Without numbers per channel the setting is a guess.
  2. List Search campaigns with Display: every affected campaign gets a decision before February: keep Display at 50 percent, cap it lower, or remove it.
  3. Clear image rights before December 4: for each landing page Performance Max points to, we check whether every image may be used in ads. Until then we create new campaigns with image extraction deliberately switched off.
  4. Check the defaults on every new campaign: videos from other channels, AI Max, automatic text assets, and URL expansion are switched on only where they fit the account.
  5. Inventory server containers: for each server-side Tag Manager setup we record whether IP addresses are redacted today and what the privacy policy says about it. The decision on the transformation is made before January 11 together with the client's data protection officer.
  6. Clean up promotion titles: we go through all planned Black Week promotions for dates in the title.
  7. Change nothing fundamental during Black Week: channel priorities and the new lifecycle goals are tested in December. Restructuring in the highest-revenue week of the year costs more than it gains.

We have been managing Google Ads accounts since 2010. If you want to know which of these changes affect your account, reach out via contact. How we work is described on our Google Ads page.

Our prioritized to-do list

  1. This week: check promotion titles in Merchant Center and clear image rights for Performance Max landing pages.
  2. By December 1: review Demand Gen campaigns for ad groups that run on Display only.
  3. In December: analyze the channel report and test channel priorities in one campaign.
  4. By January 11, 2027: decide and document how IP addresses are handled in the server container.
  5. By February 2027: migrate Search campaigns with Display and move scripts and tools off API v23.

FAQ

What is channel prioritization?

Channels in a campaign can be set to high or low priority, and low-priority ones capped as a share of daily budget.

Separate YouTube and Search in Performance Max?

Still not possible. Google channels remain one block.

What changes on December 4?

New Performance Max campaigns pull images from the landing page by default.

Ads in AI Mode in the EU?

Not yet. The October 28 expansion names no EU country.

What happens on January 11, 2027?

Google's ad tags in the server container process full IP addresses unless a transformation prevents it.

← All posts Google Ads at rulers →